Shelly EM 50A Clamp Holder

Disclaimer: Electrical work shall only be performed by a qualified professional.

Note: 4 different designs available.

I was unhappy with how the current clamps for my Shelly EM were just “hanging around” in my fuse box.  So I created this bracket to hold then in place to make everything nice and tidy.

The holder is attacked using double sided tape.  I would highly recommend something strong like the 3M VHB series.  Also make sure you wipe the inside of the fuse box to clean the mounting surface.

The Shelly 50A clamps are actually quite wide, so with this bracket you can have a clamp every other fuse. They also have a cable management rail build-in to keep your wiring clean.

 Just remember that your Shelly EM needs to be powered by the same phase (L1, L2, L3) you are measuring, otherwise you will get incorrect readings.

They are available in 2x, 4x or 6x units.

Also there are "click-together" singles if your need more or less.

The DIN rail mount holding the actually Shelly EMs is from @GregK_224540, which I can recommend..