Tool for Making Mushroom Shaped Potato Dumplings

A simple tool to make mushroom shaped potato dumplings as seen in several youtube videos, such as this one.

I tried making them with a soda bottle as shown but found the dumplings would get stuck in the threads, making the process unpleasant. So I tried again with some little printed tools and it worked super well!

Mushed-Potatoes!  uwu

Several files are available:

• A positive of the tool is available, for plain 3D prints in food safe material
• A negative mold is available, for making a single-pour tool from very firm silicone
• An internal insert for making a two-pour tool from softer silicone

If using the internal tool, print with tree supports and carefully remove all the bits. Insert into the mold and do the first pour, up to around the top of the insert but no further (~8g silicone). Once cured and set firm, break the alignment cross and pins (they will snap at the notch), and do a second pour to cover the top of the insert.