Ugrinsky Vertical Axis Wind Turbine Remix

Thanks to vladua for the great wind turbine. https://www.thingiverse.com/thing:3627007
I wanted to have the bearing completely below the wind turbine. To do this, I enlarged the bars at the top and bottom and added 8 mm holes. I added a thin layer to the upper hole for better bridging. Since the wind turbine has a small base, I added supports and adhesive discs. For printing, the wind turbine should be turned in such a way that the first layer of the upper end plate bridges briefly. NabeHalter22 fits a 22mm rod, hub fits a 25mm rod or external 40mm clamps. If necessary, the axis can be fixed with M3 screws and nuts using the adjusting ring. I recommend a test print sunk in Z for the hub. Then measure the inner diameter (22.0 mm) and compensate for the possible deviation with a horizontal hole extension (Cura). Hub holder was printed with PETG and the rest with PLA.
An axle 8x310 mm and two ball bearings 608ZZ 8x22x7 mm are required, for the holder 4x cylinder head screws M5x35 with nuts.
If you want, you can glue "Savonius3KlLi" together and attach it to the protruding axle.

I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA, if the printer is suitable for ASA.

I would also like to recommend my other wind turbines:

Illusion Windturbine MK2 counter-rotating

https://www.printables.com/de/model/895957-illusion-windturbine-mk2

Double rotor addon for wind turbine MK2

https://www.printables.com/de/model/887565-double-rotor-addon-for-wind-turbine-mk2

Double wind turbine MK3 counter rotating

https://www.printables.com/de/model/883528-double-wind-turbine-mk3-counter-rotating

Wind Turbine MK3 neo Remix

https://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remix

Archimedes Wind Turbine Remix

https://www.printables.com/de/model/773350-archimedes-wind-turbine-remix

Mini Airplane Wind Turbine

https://www.printables.com/de/model/643163-mini-airplane-wind-turbine

Savonius Vertical Wind Turbine Remix 

https://www.printables.com/de/model/775074-savonius-vertical-wind-turbine-remix

Darrieus Savonius Turbine Ver.2 Remix 

https://www.printables.com/de/model/776180-darrieus-savonius-turbine-ver2-remix

Windturbine MK2 neo Remix

https://www.printables.com/de/model/782829-windturbine-mk2-neo-remix

Illusion Windturbine 200 / 250

https://www.printables.com/de/model/785427-illusion-windturbine-200-250

Toroidal Illusion Windturbine 

https://www.printables.com/de/model/790615-toroidal-illusion-windturbine

Illusion Windturbine TIE F. Tail Fin

https://www.printables.com/de/model/796246-illusion-windturbine-tie-f-tail-fin

Wind Turbine 620 mm

https://www.printables.com/de/model/810511-wind-turbine-620-mm

Wind turbine savoniov helix – Remix

https://www.printables.com/de/model/843331-wind-turbine-savoniov-helix-remix