Enjoy !
Printing instructions:
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- Filaments Used:
- PLA PolyTerra Charcoal Black Transmission Distance: 0.3
- PLA PolyLite Steel Grey Transmission Distance: 1
- PLA PolyTerra Arctic Teal Transmission Distance: 0.5
- PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
- Start with Charcoal Black
- At layer #10 (0.88mm) swap to Steel Grey
- At layer #16 (1.36mm) swap to Arctic Teal
- At layer #20 (1.68mm) swap to Cotton White for the rest.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Tacos
