Ender 3 V3 SE / KE Storage Box With Sliding Lid

I made the walls thicker so it's sturdier and added a sliding lid.

Lid has a tolerance of 0.08mm on each side. Printed on my SE and the lid slides perfectly. I recommend printing the box first and then just a section of the lid to make sure it will be a good fit.

I have provided the model files if you want to test different tolerances or make any other changes.

I used a piece of double sided tape under the box so it doesn't move.

The left side has a groove for the following cable clip from thingiverse:

https://www.thingiverse.com/thing:6417863