February 18, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG BambuLab Basic Gold Transmission Distance: 1.7
PLA+ Numakers Nuclear Red Transmission Distance: 0
PLA+ Numakers Royal Blue Transmission Distance: 3.2
PLA+ Numakers Pitch Black Transmission Distance: 2.5
PLA+ Numakers Forest Green Transmission Distance: 14
PLA+ Numakers Ivory White Transmission Distance: 8
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Gold
At layer #4 (0.4mm) swap to Nuclear Red
At layer #5 (0.48mm) swap to Royal Blue
At layer #7 (0.64mm) swap to Pitch Black
At layer #8 (0.72mm) swap to Forest Green
At layer #10 (0.88mm) swap to Ivory White for the rest.
Your last slider is set to 1.52mm which is lower than the model height.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Izallbad702VegasRob
