MANDO | paper towel roll holder

MANDO | paper towel roll holder

Store your kitchen paper towel roll in style with this elegant wicker roll holder.

Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below)

Happy printing!

DIMENSIONS (Large) | Ø 142 mm x H 250 mm
DIMENSIONS (Small) | Ø 142 mm x H 209 mm

V5 UPDATE:
This new version has a thicker weave of 0.9mm instead of 0.5mm.
After using my own MANDO for quite a while, I found the 0.5mm weave too fragile.
0.9mm weave is made of 2 wall lines, it is much stronger and gives a very clean print.
Also, I made the frame a little bigger/stronger, which should give a cleaner print.
 

3D PRINT SETTINGS 
The roll holder prints upright without supports or brim. 
The STL file is all already oriented properly.

For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings.
Otherwise Bambu Studio will detect some of the weave layers as empty.

Layer height: 0.3mm/layer 
Wall line count: 2 
Build adhesion type: None 
Supports: None 
Infill: 20~30%