Minimal Frame or Photo Stand

So I designed several silhouettes made in my 3d Printer and also designed a frame stand for them. Tried several models and my main goal was to save as much filament without compromising stability. After several iterations I think had a good one.

To get a proper stand for your frame follow the following steps:

1. Measure your frame length.

2. Divide your Frame Length by 3 and then multiply by 2: (FrameLenght/3)*2

i.e. 78.1/3 = 26.03 * 2 = 52.8

3. Use this result in millimeters and use this value in the X axis only and scale the model in your slicer to have an according stand for your stencil. 

*Be sure to uncheck Uniform Scaling.

Printing Settings:

• Layer height: 0.2mm or 0.28mm
• Infill: 20%

Important Note:

The gap to hold the frame is 2mm width.