Ayudame3d Helpi F1 Car

This is an accessory to complement “helpi” from “auyudame3d” 

https://www.printables.com/model/707692-mini-helpi-ayudame3d-minihelpi

This model does not have support.

There is a bridge on the rear wing that can be done without supports.

You don't need to add tolerances/horizontal expansion

The wheels are attached to the axles with a piece of filament. There are 2 “washers” that are used to ensure that the axles do not slip or move from side to side. You may need to glue this to make sure they don't move.