Fanatec ClubSport DD/DD+ Mount - Series 15 & 40 Extrusion M8 Bolts

Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts

The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the center points of the slots. However, I tested it on Sim Labs Series 40 Extrusion and it worked just fine.

https://www.tnutz.com/product/ex-1530-black-2/

https://www.tnutz.com/product/ex-1545-black/

This mount allows 1mm of clearance from top to bottom for the power brick. The clearance works perfectly fine, but I added a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo.

*There is no need to use supports, simply print with the Fanatec Logo on its side.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

.20mm

Infill: 

30

Filament: Inland PLA+ Black Post-Printing =============

Optional: Add a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo and possibly the sides.

Category: Video Games