Telepass support

Practical telepass support for the new model (2023) with quick release to be able to move it from one vehicle to another

I recommend printing it in ABS or ASA to be able to resist the temperatures that a car can reach under the sun in summer.
The print requires support, the photo shows where to place them.

PRINTING INSTRUCTIONS:
- RECOMMENDED MATERIAL: ASA, ABS, PC
- SUPPORTS: Yes
- BOTTOM LAYR: 4/5
- TOP LAYER: 5
- WALLS: 3/4
- FILLING: 30% grid
- LAYER HEIGHT: 0,2mm
To attach it to the car windshield I recommend using 3M high temperature transparent double-sided tape