Angle-Assistant for Whetstone / Knife Sharpener

A simple assistant to keep a constant angle while sharpening knifes with a whetstone.

Technical Data:

• for Whetstone 180x60x30

• for Whetstone 182x62x30

• for Whetstone 200x50x25

Print Settings:

• no supports required

• printed with normal PLA (Flex/TPU for the “Antisplip” part, if you need it)

• 15% infill (i've used 30% but 15% should also be fine)

• i recommend using lower print speed for the portal part in order to get better print quality due to the shape (printed mine with structural presetting in prusa slicer and got good result)