Brush tray for - Gridfinity Stackable Citadel Paint Pot Storage REMIX

Currently I'm using a ReallyUsefulBox 9L, which has a gridfinity base, with the Citadel paint storage trays. I'm able to get two layers of paints and then two paint brush trays on the top layer (see pic). Any I plan to store other items in the box.

The brush tray doesn't have any brush holders/stops, just a tray.

It is 10mm deep and fits any selection of brushes. My current brushes have a wide handle, which is why I went with a 10mm recess. The trays then stack on each other.

I've added a 2x5 tray but I also made a 2x6 tray, if anybody needed a slightly longer model. The .f3d file can be downloaded if you want to make changes.

Files;

• Brush tray 2x5
  • BrushTray 2x5 - brush tray as seen in the images
  • BrushTray 2x5split/BrushTray 2x5split1 - same model but split if you've a smaller printer
  • BrushTray 2x5without - this doesn't have the Citadel mounting hole, just a flush base
• Brush tray 2x6
  • BrushTray 2x6 - brush tray as seen in the images
  • BrushTray 2x6split/BrushTray 2x6split1 - same model but split if you've a smaller printer
  • BrushTray 2x6without - this doesn't have the Citadel mounting hole, just a flush base

Designed to be used with a 0.4 nozzle but I printed with a 0.6 nozzle with a layer height of 0.4. Printed with PETG, which is why I need to clean the magnet area up.