Rival MT10 V2 Rear Bumper w/ Wheelie Bar

Printed in Overture TPU.  I've taken it to the skate park a few times and so far it has held up fine.  The wheelie bar is optional and no longer adjustable.  Being TPU, it is a bit squishy but it works well enough and won't break.

I also made another design with more support.  This should be better for materials other than TPU.  But I've been running the original and haven't had any issues yet so I haven't printed it.

There are mounting holes for the rear LED lights.

Prints without supports.  The top holes in the bridging section aren't the best but I sent it anyway and they came out fine. (v2 does have some supports but they are pretty minimal)

The bumper re-used all the stock hardware.  The wheelie bar attaches with 4x M3x22mm screws and 4x M3 nylock nuts.  I like to use 12.9 grade on my RCs but they are probably not required for this.  TPU is not strong enough to hold screws securely.  The M4 screws https://amzn.to/4gdxwwHconnecting the cage to the bumper will come loose periodically.  Or use the V2 bumper with 2x M4x22mm screws and 2x M4 nylock nuts.