Parametric HSW Wire Guide

These “squeeze fit” wire guides are just flexible enough to squeeze a power cable through the opening, and then be squeezed together to press into your honeycomb storage wall.

I recommend printing these in something other than PLA, which tends to deform and “remember” the shape it's being held in, eventually losing the spring tension that holds these in place.

These do not need supports, and are designed to print vertically to get the most strength out of the extrusion geometry. I had no problem with the “2+extra” size on my satin PEI but would recommend a brim for anything taller.

If you need longer segments, or other configurations that I didn't upload, you can access the parametric source at Onshape here.