Archimedes Wind Turbine Remix 3D Printer File Image 1

Archimedes Wind Turbine Remix 3D Printer File Image 2

Archimedes Wind Turbine Remix

Stuart800

May 30, 2024

Description Comments Tags

Description

Thanks to Lukass for the great wind turbine.
The wind turbine turns very well. An (Brass) axle 4x190 mm, 4x ~ 80 mm and a screw M3x6 are required. Drill out the bearing blocks with 4.2 mm. Drill out the cross hole of the conical disk with 2.5 mm and screw in the M3 screw. Glue the conical disk to the center of the Archimedes wind turbine with CA. The console fits a 16 mm rod. If you glue a short piece (approx. 6 mm) of the axle into the swivel bearing and sharpen the swivel axis at the top, the wind turbine will align itself very easily with the wind.
Rahmen200 fits on a print bed 200x200 mm.

I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA.

I would also like to recommend these wind turbines:

Illusion Windturbine MK2 counter-rotating

https://www.printables.com/de/model/895957-illusion-windturbine-mk2

Double rotor addon for wind turbine MK2

https://www.printables.com/de/model/887565-double-rotor-addon-for-wind-turbine-mk2

Double wind turbine MK3 counter rotating

https://www.printables.com/de/model/883528-double-wind-turbine-mk3-counter-rotating

Wind Turbine MK3 neo Remix

https://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remix

Ugrinsky Vertical Axis Wind Turbine Remix

https://www.printables.com/de/model/769216-ugrinsky-vertical-axis-wind-turbine-remix

Mini Airplane Wind Turbine