Wyze Lock Keypad Extended Base

I attached my Wyze Lock Keypad to my door using a command strip. However, because of the additional height the command strip adds, the keypad becomes unstable.

I designed this extended base for the keypad to make it more stable, and it works like a charm.

This design assumes you have used one of the command strips with the Wyze Lock Keypad to extend the contact point with your trimmed large command strips. You could also use a medium command strip; I had large strips available and prefer the additional 10mm or so of contact they provide.

The keypad base should be assembled in this order: Keypad → one original strip → trimmed down large command strip(s).

It was printed at a .2mm layer height in Jessie Black PLA.