Printer Cofiguration Indicator

Since the PrusaSlicer isnt capable of remembering your current Printer Configuration when you switch between your Printers, and you dont want to use specific configuration files, here is a “simple” Solution to physically display your current Configuration right on your Desk, Wall or Printer.

This Indicator is also helpful, when your Printers arent right beside your workplace.

All files are made for MultiMaterial Setups, but are also suitable for SingleMaterial Printers. To maintain the multibody environment, you have to select a MultiMaterial / MultiExtruder Printer, Drag the files into the Slicer, and then select your desired Printer you want to print on.

Instructions:

Main Body

Select your desired files (Body Size, Body Symbols, Printer Number, Vendor and Model) and drag them into your Slicer to maintain the multibody environment. If you have a MultiMaterial Setup, you can print every body in your desired Material and Color.

If you have more than one Printer of the same type, you can use different numbers (1-5) inside the printer icon. 

Material Vendor Badge

Select your desired files (Baseplate, Vendor) and drag them into your slicer to maintain the multibody environment. My recommendation is, to print the Vendor Badges in the Vendor-like colors. You can also print them in a single Color.

Material Type Badge

Select your desired files (Baseplate, Type) and drag them into your slicer to maintain the multibody environment. My recommendation is, to print the Material Badges in the real Material and Color, to always have a small example by hand.

If you need any additional Materials, Vendors or Models, just leave a comment and i will upload them as soon as possible.