Spinning Filament Swatch Display - Remix with lid

When I saw Brad's Swatch Display, I immediately thought, “Wow! That's really well done!”
The beautiful carousel and the lifting of the samples I like very much.

However, I use the well-known filament samples from Zahg or Seemomster or my own, which contain significantly more information and are therefore also larger. 
So I created a matching Swatch Display according to Brad's design. 

It can hold up to 62 samples, which is more than enough for me. Although I will now print the approximately 20 samples that I recently neglected. 

Since I occasionally transport the samples, I also created a lid for the display that includes a carrying handle.

Printing information

Layer height: 0.2
Infill: 10% 
Support: none

More detailed:

If you are printing with a 0.6mm nozzle, you can speed up the print and print with a 0.4mm layer height. However, in the area of the threads, you should print with a 0.2mm layer height: Top 0.2-21mm, Lid 22.6-45mm.

If you like the colored rings, then set the color changes as follows: Top 26.2 and 36.2mm, Lid 13.0 and 22.6mm.

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.