Star Wars Trooper Helmets

Introducing my first, single plate, HueForge model. A must have for all Star Wars fans.

I have been playing around with the latest version on HueForge and really like the new features, especially the "color pop" feature. This feature allowed me to create those little red details on this model.

The design requires the following colors

• Black
• Dark Grey
• Very Light Grey
• White
• Bright Red

These are the filaments I've used

• Geeetech PLA Black
• Fillamentum ExtraFill PLA Iron Grey
• Fillamentum ExtraFill PLA Electric Grey
• Geeetech PLA White
• Fillamentum ExtraFill PLA Traffic Red
   

Box used to display the model (version Narrow 150x210)

• Single slot version
• Three slot version

Print instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

• Start with Black
• At layer #7 (0.64mm) swap to dark grey 
• At layer #15 (1.28mm) swap to very light grey
• At layer #19 (1.6mm) swap to white
• At layer #21 (1.76mm) swap to bright red for the rest.

No need for AMS or MMU. All color changes are done using filament swaps.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller subscription.