Segmented box with spout and lid for honeycomb storage wall system (HSW)

Segmented box with spout (front only) and lid for honeycomb storage wall system (HSW).

I use this for my filament clips but it's good for any small objects.

It needs two “empty-insets” to be fixed to the HSW.

The hinge parts are quite delicate. I recommend to dial down the speed a bit for the hinges on the box to facilitate cooling (e.g. with range hight modifier, see 3mf). Additionally printing with variable layer height may be a good idea, because the hinges need more detail than the rest (also, see 3mf). 
Note that the lid has two different sides, it needs to be snaped to the box with the flat side down (like on the build plate).

I printed this with PrusamentPETG.

UPDATE: There is also a bigger version and the step-file included (don't try to slice and print the step-file, since the lid is placed where it belongs and is not printable in this configuration).

UPDATE: If you do not like the separator, Thorb took care of that here.