March 27, 2024
Description
Opening Tool to maintain or replace the O-Rings in the PPQ M2 T4E Magazine.
You need two M2x16 screws and a PH2 bit (optional).
Just screw in the screws from the bottom until they stick out about 1mm.
The PH2 bit on the side should hold by itself, otherwise use a drop of glue.
When using the tool, be sure to apply even force, to avoid scratching the valve.
Inspired by the similar tool from Untangleart on Cults3D, however modeled from scratch.
https://cults3d.com/en/3d-model/various/umarex-t4e-mag-valve-tool-for-maintenance-and-repair
License:
Creative Commons — Attribution — Noncommercial
8
KnoppersDE
