A2C USB-C Cable Tester CaberQU

I modified the top part of the C2C CaberQU USB-C cable tester case to work with the CaberQU A2C cable tester. The bottom part is the same as in https://www.thingiverse.com/thing:5568364

Print Settings

Rafts: No

Supports: Yes

Resolution: 0.16 mm

Infill: 15%

Notes: Print with auto generated tree supports from build plate only.

Post-Printing: I used a 1.8 mm drill to open up the hinge holes and then used a piece of PLA filament as hinge pin.