AMVR Stand Arm Replacements for Quest 3 Controllers

Replacements for the original controller mount arms on the old AMVR headset stand to use it with Quest 3 controllers.

Note: If you use the step files, mirror both parts along the Y axis to get the counterparts for the right controller.

IMPORTANT: Make sure your slicer does not add supports inside the holes of the controller mount parts as they are impossible to remove. If your slicer does that add support blockers inside the screw holes.

Materials Needed

• 4x M3x12-16 countersunk screws

Print parameters

• 0.2mm Layer Height
• 3 Walls
• 15% Infill
• Supports recommended (I used Tree)
• Brim recommended (I used Mouse Ears)