Body art wallpaper (Filament Painting - HueForge)

This filament painting was created with HueForge. The artist of the original is unknown to me.

Size: 220 x 138mm

Four colors are needed to change at a specific layer height, and only a small amount of filament is consumed.

Printing information

Since these are rather complex STL files, slicing can take a while. Some of the STL files may report an error, please do not fix them! You will lose details if you do. The errors are a result of the complex STL file HueForge produces.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:

• Start with Black
• At layer #9 (0.8mm) swap to Anthracite (Dark Gray)
• At layer #14 (1.2mm) swap to Light Gray (or Silver)
• At layer #19 (1.6mm) swap to White for the rest.

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.