The Space Cowboy AR Grip

Go crazy…. Mix and match colors! Change the panel when you get bored! Change the panel when you have filament to use up! Also included are the hex textured grip panels by Slimjim240B.

Print Settings for the grip

Use: PLA+ or better

Extruder: 218C 
Bed: 60C 
First Layer Print Height: .20mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%

Print Settings for the panels

Use: PLA or better.

Extruder: 218C 
Bed: 60C 
First Layer Print Height: .20mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 2
Infill: 25%
Material Flow: 100%

Non-printed Hardware Needed:

• 1x Allen Head Screw, 1/4-28 x 1"
• 1x Steel Star Washer
• 1x Safety Selector Detent Pin
• 1x Safety Selector Detent Spring
• 1X M4x25 screw with matching nut. Stainless or black anodized to complement your color combination! (If you don't have an anodized screw paint it.)