Camera Stand [not a tripod]

Made a simple stand for mounting a camera via ball head joint or fix joint.

For bigger cameras i recommend using the larger D=200mm stand.

Technical Data:

• through holes for screws = 6,5mm in diameter

Print Settings i've used:

• 0.2mm layer height
• 30% infill (maybe less is also fine)
• most of the parts do not require supports (both stands will require supports for the inner hole)
• if you want to reduce print time with the “cameraholder_stand_D200” go for “cameraholder_stand_D200_efficient” instead which will reduce print time by about 50%