Cell Phone to GoPro Adapter with Knob

I made this model for my Galaxy S8 in it's case, so check the dimensions of your phone compared to the ones shown in the photos provided for this part and adjust accordingly, if needed. In the print files there is the native Solidworks file as well if you're feeling crafty.

A metal hex screw and matching hex nut are required:

Qty (1) Hex Head Cap Screw, M5x25mm long

Qty (1) Hex Nut, M5

(I used stainless steel for each of the pieces above)

Both the screw and the nut are light presses into the prints. Since the screws are constantly being adjusted it's best that they're made of metal so they don't break or wear out too quickly.

No supports are required for any of these parts if printed in their intuitive orientations for printing.

I'm posting a few of the prints I use regularly for my phone so check around on the page for other versions of this as well as other accessories!

If you're feeling giddy, there's a model for a clamp on cold shoe mount which works really well next to this one, see the photos that go with this model… The cold shoe can be found in my model page.

https://www.printables.com/model/781895-shoe-mount-cell-phone-clamp

This is a perfect “End of Spool” Print too, if you know what I mean…

If you'd like a quick run through of the accessories I've printed and use often check out the “Behind the Scenes” video below:

I hope you enjoy! Thanks for checking it out! If you like things like this be sure to check out the many other models I have here.