Wall-mounted Holder for Magnetic Waste Basket

Wall-mounted Holder for previously published Magnetic Waste Basket (for Original Prusa Enclosure) https://www.printables.com/model/547970-magnetic-waste-basket-for-original-prusa-enclosure

Mounts to a wall (or similar vertical surface) with screws to hold your Magnetic Waste Basket near your 3D printer.

Assembly: Attach two 12mm x 3mm neodymium magnets to the holder's magnet slots with super glue (being sure to match the magnetic poles from your Magnetic Waste Basket!), screw the holder into a wall with sheetrock screws (or similar), then simply align the magnets on your Magnetic Waste Basket with the magnets on the holder to place all your filament scraps, cleaning wipes, etc.

Usage: Simply pull the Magnetic Waste Basket away from the holder when it needs to be emptied.

The provided STL file can be printed in PETG or PLA (or pretty much any other material) and does not require supports.

A PrusaSlicer 3MF file is provided for Prusament PETG.

A g-code file has been provided for the Original Prusa MK4 using Input Shaper at 0.2mm SPEED layer height.

The Wall-mounted Holder seen in the photos was printed on an Original Prusa MK4 with Prusament Orange PETG using Input Shaper with a 0.4mm nozzle at 0.2mm SPEED layer height with a 15% gyroid infill.

Be sure to check out my other designs - including universal key covers and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso_661446/models