Xerses - LED add-on mounts for X3D v3 AMS Riser

When I was looking for an AMS riser I wanted a specific style, but I also wanted one with bevelled inside edges to allow me to add a COB LED strip that I could plug into the 5V USB plug of my P1S. I could not find anything that had the LED option and I did not want to print a second slim riser that had LEDs, as some have done. What I did find that I liked was the X3D-v3 AMS Riser created by lehighluke (link below). His riser is a remastered version of the X3D-v3 Riser | Bambu Lab X1/P1 AMS Stand by DutchWorkX3D (link below). Even though neither had an LED option, I had an idea to make some parts that could be CA glued to the original design, and that is what this make is.

These parts are designed to glue directly to the X3D V3 AMS Riser frame to allow the addition of a COB LED strip, but have it angled downwards to avoid being blinded by the light when looking into the top of the printer. The bottom face of these parts adds an 18mm high surface to stick a COB LED strip of almost any width. I left gaps in the corners, as well as a bit of a “cave” on each corner part to allow for the LED strip to be bent and wrapped all the way around.

This is only my second original make, so there is room for improvement and there may eventually be revisions.

Included in the file section are the STL file with all 8 pieces (each part is identified), as well as my 3MF file. I printed these in Bambu slicer with 0.2 standard settings using black Sunlu PLA Meta.

The COB LED I am using is the USB with button, 2 meter version of this: https://www.aliexpress.com/item/1005004585867911.html

2024-03-06 : I have added a PDF showing the installation of the LED strip I received today. It also shows several up close pictures of the final results. Enjoy!

This is the riser I am using - Remastered X3D V3 Riser by lehighluke: https://www.printables.com/model/730961-x3d-v3-ams-riser-rebuilt-for-printing-without-supp *** IMPORTANT NOTE about the remastered version I used (see make comment I posted). I printed the AMS riser parts on their sides to make sure the large overhangs were perfect.

This is what the remastered version is based on - X3D V3 Riser by DutchWorkX3D: https://www.printables.com/model/564394-x3d-v3-riser-bambu-lab-x1p1-ams-stand