Windturbine MK2 neo Remix

Thanks again to rosch8 for the beautiful original wind turbine.

I modeled a rear with tail unit, which does not require a threaded rod. This makes it easier to turn in the wind when the stick isn't quite vertical. I removed the bars on the vertical axis and added a cylindrical bearing seat. I used 688 ZZ ball bearings for the rotor and vertical axis. There are six different rears and four different tailfins I glued the tail units to the carrier with CA. I recommend the parts with DIN934, which are for normal nuts.

Assembly:
1x threaded rod M8x106 mm as a wind turbine axle (M8x116 mm DIN934 nut)

4x ball bearing 688 ZZ
2x cylinder screw M 4x16 for body
2x cylinder screw M 4x10 with nut for rear
1x cylinder screw M 4x10 with nut for tail unit

I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA.

I would also like to recommend these wind turbines:

Illusion Windturbine MK2 counter-rotating

https://www.printables.com/de/model/895957-illusion-windturbine-mk2

Double rotor addon for wind turbine MK2

https://www.printables.com/de/model/887565-double-rotor-addon-for-wind-turbine-mk2

Double wind turbine MK3 counter rotating

https://www.printables.com/de/model/883528-double-wind-turbine-mk3-counter-rotating

Wind Turbine MK3 neo Remix

https://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remix

Archimedes Wind Turbine Remix

https://www.printables.com/de/model/773350-archimedes-wind-turbine-remix

Ugrinsky Vertical Axis Wind Turbine Remix 

https://www.printables.com/de/model/769216-ugrinsky-vertical-axis-wind-turbine-remix

Mini Airplane Wind Turbine

https://www.printables.com/de/model/643163-mini-airplane-wind-turbine

Savonius Vertical Wind Turbine Remix 

https://www.printables.com/de/model/775074-savonius-vertical-wind-turbine-remix

Darrieus Savonius Turbine Ver.2 Remix 

https://www.printables.com/de/model/776180-darrieus-savonius-turbine-ver2-remix

Illusion Windturbine 200 / 250

https://www.printables.com/de/model/785427-illusion-windturbine-200-250

Toroidal Illusion Windturbine 

https://www.printables.com/de/model/790615-toroidal-illusion-windturbine

Illusion Windturbine TIE F. Tail Fin

https://www.printables.com/de/model/796246-illusion-windturbine-tie-f-tail-fin

Wind Turbine 620 mm

https://www.printables.com/de/model/810511-wind-turbine-620-mm

Wind turbine savoniov helix – Remix

https://www.printables.com/de/model/843331-wind-turbine-savoniov-helix-remix