Beamer Mount

I needed a cheap solution to mount my beamer.

I decided to use Clamps.

The beamer has moving parts and the resonances transmit to the clamped part. I didn't count for that, my bed is resonating the beamer fan which is unfortunate but I learned from it.

Other from that it works for my purpose.

• The hole for the beamermount strut/brace which gets injected is 6mm width and 29 in height.
• the rod is 10mm in diameter
• screw depends on your beamer model

*It is important that you dialed in your bridge settings for this print.

There is a bridge of 3cm.*

Please, if someone build this, tell me if it worked for you.

Uploading a picture would be very appreciated too.

sincerely.

Category: Office