March 1, 2024
Description
Fairly simple garage design based on Tej's Garage from 2 Fast 2 Furious. It has showroom area, indoor garage and outdoor garage with 2 car lifts.
The size is slightly shrunk to make it easier to print for standard printer size and some changes like a back wall at the outdoor garage since most user won't be making a pond behind it.
Checkout my showcase video:
The diorama is separated into multiple parts for easy printing. All files are packed into a zip files and arranged in folder as follow:
Nozzle size = 0.4 mm
Layer height = 0.2 mm
Filament change layer for colours on "OutdoorWall1 - Navy + Red" & "OutdoorWall2 - Navy + Red":
1) Start (Overall wall colour, mine is in navy)
2) Layer 8 (Stripe colour, mine is in red)
Filament change layer for colours on "SideWalk. - Yellow + Red":
1) Start (Sidewalk top colour, mine is in red)
2) Layer 4 (Overall sidewalk colour, mine is in yellow)
Filament change layer for colours on "BackWall - Navy + White + Red + Orange" & "FrontWall - Navy + White + Red + Orange":
1) Start (Exterior wall colour, mine is in navy)
2) Layer 5 (Top half interior wall colour, mine is in white)
3) Layer 13 (Interior wall stripe colour, mine is in red)
4) Layer 18 (Bottom half interior wall colour, mine is in orange)
Filament change layer for colours on "LeftWallDecoInt - White + Red + Orange" & "RightWallDecoInt - White + Red + Orange":
1) Start (Top half interior wall colour, mine is in white)
2) Layer 14 (Interior wall stripe colour, mine is in red)
3) Layer 19 (Bottom half interior wall colour, mine is in orange)
Filament change layer for colours on "GarageRoofV2 - Grey + Red":
1) Start (Roof top colour, mine is in grey)
2) Layer 4 (Remaining roof colour, mine is in red)
Filament change layer for colours on "Floor - Black + White":
1) Start (Overall tile gaps colour, mine is in black)
2) Layer 6 (Tiles colour, mine is in white)
Filament change layer for colours on "FrontDeco - White + Red" & "RightDeco - White + Red":
1) Start (Overall part colour, mine is in white)
2) Layer 13 (Wall line colour, mine is in red)
Filament change layer for colours on "Floor - Black + White":
1) Start (Overall tile gaps colour, mine is in black)
2) Layer 16 (Tiles colour, mine is in white)
Filament change layer for colours on "RoofV2 - Grey + Red + Yellow":
1) Start (Roof top colour, mine is in grey)
2) Layer 4 (Line pattern colour, mine is in red)
3) Layer 10 (Remaining roof colour, mine is in yellow)
The car is just placed on the diorama, there are no holes to tie the cars down by wire.
It is recommended to use glue or double sided tape for this build.
Check out my assembly video to give you a better idea on how the build supposed to go:
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs is welcomed too.
I can be contacted through Instagram or Twitter too:
Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
License:
Creative Commons — Attribution — Noncommercial
GigaPenguin
