fingerbot plus ring arm

Ring arm to pull switches on or off. It is to work with fingerbot plus which I got off aliexpress:

https://www.aliexpress.com/item/1005005168070181.html

I didnt realise it didnt come with all the arms so I made my own based on the manual: https://doc.adaprox.io/user-manuals/adft0101-en

This works perfectly for me:

• 3 perimiters
• 0.15mm layer hight
• 0.6mm nozzle
• 20% infill
• Organic supports with 0.2mm separation
• print with ring horizontal

Print 2x blocks and then use double sided foam adhesive to glue the blocks to the fingerbot and the fingerbot to the device to switch. You might need to play around with different size blocks/foam. The blocks are just cubes so create your own if needed. I used 2mm foam tape and was able to hookup the fingerbot to home assistant and then to my monkey.