October 8, 2021
Description
Some time ago I designed my own headphone clamp that fits my shelf.
The standard design (screw_20-45mm.stl) fits horizontal surfaces that are between 20-45mm thick.
By request I've added a longer screw (screw_0-45mm.3mf) that fits all surfaces between 1-45mm. Both can accommodate the charging cable as well.
Prints with minimal support.
Printer:
Craftbot
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: Das Filament PETG Transluzent Red
Category: Audio
License:
Creative Commons — Attribution — Noncommercial
Kit
