Meshtastic case

Case for my DIY Meshtastic device. It is not mention for some official board (but maybe some will fit), it is for custom Meshtastic device. I have used ESP32, LoRa module (Ra-01 LoRa SX1278 433M, frequency will depend on your region) and SSD1306 OLED display. I just wanted test Meshtastic so maybe it will come handy for someone too:)

I have cretaed battery case as well so it is fully portable.
I have used 7.4V 1100mAh Li-Po battery and step down module to decrease voltage for ESP32 to 5V (connected to Vin pin).

I have printed with White and Green PLA for nicer look.

Modules used:

https://www.aliexpress.com/item/1005005988314674.html?spm=a2g0o.order_list.order_list_main.65.28a31802IwJL9k

https://www.aliexpress.com/item/32811847832.html?spm=a2g0o.order_list.order_list_main.248.28a31802IwJL9k

https://www.aliexpress.com/item/32638662748.html?spm=a2g0o.productlist.main.5.75e2136fRXv5OL&algo_pvid=26155278-b2f9-4807-98e5-abda3f04f071&algo_exp_id=26155278-b2f9-4807-98e5-abda3f04f071-2&pdp_npi=4%40dis%21USD%211.32%211.32%21%21%211.32%211.32%21%402103868817090615149355338e965c%2167465318934%21sea%21CZ%21739944150%21&curPageLogUid=rWBGH1yPhnzM&utparam-url=scene%3Asearch%7Cquery_from%3A

For battery case:

https://www.aliexpress.com/item/32413364849.html?spm=a2g0o.order_list.order_list_main.23.13a81802t2yx2N

https://www.aliexpress.com/item/1005005982194211.html?spm=a2g0o.productlist.main.95.15f7VcynVcyno7&algo_pvid=9555008d-caaa-4edb-85a1-5e69225fb2b7&algo_exp_id=9555008d-caaa-4edb-85a1-5e69225fb2b7-47&pdp_npi=4%40dis%21USD%2112.35%218.89%21%21%2188.55%2163.76%21%402103853617090617314744194e9428%2112000035165115037%21sea%21CZ%21739944150%21&curPageLogUid=x4KO5WujKBVy&utparam-url=scene%3Asearch%7Cquery_from%3A

BambuLab X1C
0.2
20 infill
PLA+
no supports