March 4, 2024
Description
Fiber component tray. Holds up to 2 wider (~5mm diameter) components with two spools to store fibers attached to the said component. One can spool them separately or by using 8-figure.
Two magnets on the side to store the tray vertically. Additionally, one magnet per side (top/bottom) for horizontal storage. Magnet diameter 10mm and height 2mm. The top and bottom are press-fit, and the sides are glued in, but they are close to being a press-fit.
Separate covers (with or without a central grid) to secure the fibers. The grid is compatible with fiber connector holders, see pictures.
Default fiber component housing diameter ~5mm. Can be changed as a parameter in the provided CAD files.
License:
Creative Commons — Attribution
8
Filip Sośnicki
