Power connector clamp

The design needs to be adjusted according to the connector type, might not work with all the cables. Use at own risk.

There are two versions of the clamp fitting a different shapes of connectors. 

Manufacturing procedure:

• Material: PETG (PETG V0)
• 3D Printer: FDM 3D printer, average print time 1 hour (with Input Shaper on MK4)
• Slicer settings: 0.2 layer height, 6 perimeters, no supports, print in vertical position
• Post processing instructions: Clean the stringing
• Assembly instructions: Insert on the connected cables, check if the connection is tight enough. 

Credits: Designs used in the visualization

https://grabcad.com/library/iec-320-c13-cable-end-1

https://grabcad.com/library/power-cord-c14-iec-60230-1