A minimal plant pot with wooden dowel legs, with an organic shape. Great for helping your plant really ‘stand’ out!
- Designed to support plant pots up to 5"
This is created with printability and minimal material usage in mind, but to have it still look beautiful. It is separated into a top piece and two bottom pieces, along with three printable pins to help connect and strengthen it. No supports are required for this design!
Printing:
- Printed with Bambu-PLA, 0.2mm, 15% honeycomb, no supports for any parts
- Print the top piece designed to print upside down
- Print the two bottom pieces sideways. Advised to print on a raft if you are having difficulties with any warping
Construction:
- A ¾" wood dowel will be required for this. I have cut them down to 1', but this can be any height of your choosing
- Connect the bottom pieces with the 3 pins, glue will help add strength
- The bottom piece should then snap into the top, make sure to use strong glue for this
- The dowels should then slide in. It should be tight enough that the dowels won't fall out
Cirrofoen
