Kobra 2 "Mantis" Quick-Remove Circuitry/Wire Shroud

Hello everyone,

This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct. 

https://www.printables.com/model/724096-anycubic-kobra-2-upgrade-kobra-2-plus-kobra-2-pro-

It's essential to note that this model has only been tested on a Kobra 2 printer. I don't have specifications for any other Kobra-based printer, so it may not be compatible with slight variations in other models.

While there's another shroud variation designed for the Mantis duct, I encountered difficulties getting it to print accurately enough to fit my extruder. Therefore, in an effort to simplify the printing process and still maintain the Mantis duct's original quick-swap capability, I eliminated the need for screws. The shroud is designed to be plug and play, featuring three nubs that should securely press fit into the two previously used screw holes that held the stock shroud in place. The third nub will naturally seat itself inside the hole on the front of the fan.

Here is a poor resolution video of removing the cowl and reattaching it. :D

Another of a print occurring with the shroud on.