January 4, 2023
Description
Box for self-made HomeMatic HM-SEC-WDS water sensor using Arduino Pro Mini.
The box is big enough to fit a PCB with all the needed components and plug connections for the Arduino Pro Mini, CC1101 868Mhz module and the batteries.
See https://asksinpp.de for info about the general setup and https://github.com/pa-pa/AskSinPP/blob/master/examples/HM-SEC-WDS/HM-SEC-WDS.ino for the sketch.
5 M3 nuts and 5 M3 screws (all the same length, the height difference for the middle screw is build into the box) needed for the legs.
Printed with Prusament PETG, supports recommended for the holes for the nuts - push them out with a screw…
License:
Creative Commons — Attribution — Noncommercial
9
Robin
