Kenwood TH-D7 Wall holder / Table stand / Custom mount

Screw it to a wall or use it as a table stand, or create a custom mount for what ever you like to attach you radio to.

To use it as a desktop stand you will need:
1x 25mm M3 screw (not counter sunk)
1x M3 nylock nut
2x M3 flat washers

I got a couple of these radio at a Ham meet up / swap meet for a good price, one I plan to sue as an I-Gate / Digipeater and want to attach it to a wall. The other one I just play around with, it stands very stable on my table but the angle of the display makes it hard to read, leaning it back helps a lot. This stand/holder does both.

Added a rotated foot (mk II), to get more strength where is matters.

Designed in OnShape:
https://cad.onshape.com/documents/d19b17ac2e4cde036cabbcf1/w/d2438f73878a7b5336df17c6/e/217b3617d44cbf584d0268b9

Print Settings

Printer:

Duplicator i3

Rafts:

Supports:

No

Resolution:

Infill:

whatever

Notes:

This stand have an integrated breakaway support in the bottom hole, print at 0.2mm including first layer for it to remove easy.

Post-Printing

Put a screwdriver on the break away support and slam the back of the screwdriver with your hand to pop it.

And Robert is your mothers brother.

How I Designed This

Look at the CAD drawings in OnShape: https://cad.onshape.com/documents/d19b17ac2e4cde036cabbcf1/w/d2438f73878a7b5336df17c6/e/217b3617d44cbf584d0268b9

Category: Electronics