Kirigami Rose "Filament Painting"

Kirigami rose .. picture generated by AI

There are several variants of colour combinations try also new and show us your colour combos :-) 

#############################################################################

Red variant

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Red Transmission Distance: 5
PLA Aurapol Orange Transmission Distance: 4.4
PLA Jamghe White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Red
At layer #22 (1mm) swap to Orange
At layer #34 (1.48mm) swap to White for the rest.
 

####################################################################

Ping/Yellow

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Ping Transmission Distance: 2.4
PLA Jamghe Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Ping
At layer #22 (1mm) swap to Yellow
At layer #34 (1.48mm) swap to White for the rest.

####################################################################

Orange/Yellow

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA Aurapol Orange Transmission Distance: 4.4
PLA 3Dpower Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Orange
At layer #22 (1mm) swap to Yellow
At layer #34 (1.48mm) swap to White for the rest.

####################################################################

Bluelagun

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA Jamghe Blue Transmission Distance: 5
PLA JakobFilament Light Blue Transmission Distance: 3.2
PLA Jamghe White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Blue
At layer #22 (1mm) swap to Light Blue
At layer #34 (1.48mm) swap to White for the rest.
 

####################################################################

Pink/white

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Ping Transmission Distance: 2.4
PLA Jamghe White Transmission Distance: 5.2
PLA Jamghe White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Ping
At layer #22 (1mm) swap to White
At layer #34 (1.48mm) swap to White for the rest.

#############################################################################

"Loving my content? Show some love with a thumbs up 👍❤!"

Enjoy :-)