March 2, 2024
Description
Funkamateur MiniWhip encloser to be used on a fishpole.
Diameter hole for fishpole is 5.5mm
Printable right up, supports are needed only for the lower parts, block te rest. I printed with PETG Desert storm matt from brand Spectrum. 0.2mm layers, Fuzzy skin enable for outside walls .3/.6 and default values recommended by Spectrum. See gcode how I printed this object.
You need inserts for M3. See picture for exact measurements.
Use M3 bolt, which are at least 5mm long till maximum lengt of 20mm which is extremely overkill unless you have no other choice ;-)
The PCB should fit nicely into the antenna closure and the whole fits nicely on a fishing pole.
Happy listening.
Vy 73 Michel pe1pts.
PS. If you need different kind of mounting, please contact me, I will try to make it fit for you.
Reference to the MiniWhip
https://www.box73.de/product_info.php?products_id=4802
License:
Creative Commons — Attribution — Noncommercial
9
Ouwekaas
