RC Tire Gluer

Motor used - https://www.amazon.com/dp/B08HSFSNZQ - I went with 3 rpm for the motor, but feel free to use a faster one with similar dimensions. Personally, I like the speed of this one.

Hardware used 

• 4x M3 Flathead 8mm for the cover
• 2x M3 Flathead 10mm for motor mounts
• 1x M3 Ballhead 12mm for the screw cap
• XT60 Male connector for 12v input

UPDATE 03/07/24 - V2 case has a 20mm cutout for mounting an on/off switch. Any switch that accepts a 20mm mounting hole will work. I used this one: https://www.amazon.com/dp/B07S1MV462