Art Deco lamp

note: ‘base_open’ was updated. There was a small extrusion error in the top groove.

Printing:
nozzle: 0.6 mm
layer height: 0.3 mm
max. XY dimensions: 200 mm
max. Z dimension: 240 mm

base:
black PLA
line width: 0.8 mm
bottom layers: 4
top layers: 5
perimeters: 2
infill: 15%

shade:
clear PLA
line width: 1 mm
bottom layers: 4
vase mode

diffuser:
white PETG
line width: 1 mm
bottom layers: 3
vase mode

socket holder:
white PETG
line width: 1 mm
bottom layers: 4
vase mode

Square+hole cutouts should be at the bottom.

Assembly:

For pre-assembled socket+cable, print the base with open cable guide.
If you have to assemble the socket and cable, please do it professionally. In this case you can thread it through the base.
Socket holder is for D32 mm, e27 socket with two nuts.

(-thread the cable through the small hole, assemble the socket)
-fix the socket into the holder with the nuts
-slide holder onto the base
-slide the shade onto the socket holder
-slide the diffuser onto the socket holder

No glue or tape is necessary.