Hanging shower caddy

Printing:

nozzle: 0.6+ mm

caddy1:
PETG
layer height: 0.3 mm
line width: 1 mm
top solid infill line width: 0.6 mm
bottom layers: 3

caddy2: (x2)
PETG
layer height: 0.3 mm
line width: 1 mm
top solid infill line width: 0.6 mm
top,bottom layers: 4
perimeters: 2

Assembly:

Make sure ‘caddy2’ has smooth sides. Remove any over extrusions, bumps from top surface with a hobby knife and/or sanding. After cleaning it, you can carefully restore the shine with a mini gas torch.

Note that the back side of the tray (caddy1) is vertical.