2020 Print-In-Place Vertical Hinge

This is an easy-to-print, high-strength, high-precision, print-in-place vertical hinge.

Specifically designed for 2020 extrusion mounting, this versatile hinge can be used in a wide range of applications.

These hinges are printed in a vertical direction, at different heights taking full advantage of the horizontal layer strength and at the same time retaining a higher tolerance. The unique design allows the hinges to open and close smoothly while still providing maximum strength and durability.

Printing notes: The hinges were designed to be printed on their side and in the orientation the files are uploaded. Due to our unique print-in-place vertical hinge design, it is important that you keep the Z-Seams away from the pivot points for proper function. When printing is complete, the hinge will appear to be stuck in its half-closed position. To activate the hinge function, simply force it open or close. After that, the hinge will open and close smoothly and with zero play.

This is an easy-to-print design that doesn't require supports when printing, but due to its tight tolerances, a well-calibrated printer is highly recommended.

A friendly reminder: Please support our efforts in our continued contributions to the 3d printing and wet-shaving community by reporting any vendors who abuse our "Non-Commercial - Share Alike" applied for licenses. We will continue to publish our collective work free of charge for as long as time allows, and for as long as it is monetarily possible. Please post your makes. Enjoy

Print Settings

Printer Brand:

Flsun

Printer: 

Flsun Q5

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

100%

Filament: ELEGOO Rapid PLA+ Blue and Gray

Category: DIY