Air sensor box

LaskaKit ESP32, BME280, and SCD41 Enclosure Documentation

Introduction

Enclosure for the LaskaKit ESP32 and BME280 and SCD41 sensors. 

Printing Instructions

• Materials: Use PLA or ABS with a preference for PLA due to its ease of printing.
• Dimensions: Box - 82mm x 72mm x 20mm, Lid fits on top.
• Print Settings: Layer height - 0.2mm, Infill - 20%, Temperatures - PLA (Bed: 60C, Nozzle: 200C), ABS (Bed: 110C, Nozzle: 240C).
• No supports required for standard prints, though slicer recommendations for overhangs should be followed.

Brief Description

The design includes ventilation for heat management, custom openings for sensor exposure, and internal mounting points for secure placement of the LaskaKit sensors. The lid easily attaches for quick access to the internal components. The enclosure not only ensures the electronics' safety but also adds to the aesthetic appeal of the project setup.