December 16, 2024
Description
Introducing Photo Frame for the C.lamp system designed for Kodak Instant photos 2.1" x 3.4"
What is C.lamp? It is the clamp for your lamp! (or any other vertical 1 inch tube or pipe with a rough surface).
C.lamp is ideal for IKEA HEKTAR lamps, as they take up a lot of vertical space. Why not utilize that ample vertical space? With C.lamp, your lamp can double as a photo display or a nifty place to pin your To Do list.
C.lamp system's aesthetic appeal lies in its customizable color schemes. With primary and secondary colors at your disposal, the combination possibilities are endless. Default C.lamp system color scheme for photo frames:
However, don't let convention limit your imagination. Experiment and go wild with colors that resonate with you and your living space's vibe. Choose from a plethora of color combinations and materials for 3D printing.
I used Prusament PLA for this print and it should be tough enough to hold some photos.
Clean up printed Part 2 (Light Frame) from any print imperfections.
Take 4 3x3mm round magnets and insert them into slots on Part 2 (Light Frame).
Unscrew the connector piece from the C.lamp.
Add 4 magnets on top of the C.lamp connector and mark them with a marker (this is an important step).
Insert the C.lamp connector into the connector slot in the middle of the photo frame Part 2, make sure that the side of the magnet that was marked with marker is facing inside the Part 2 (Light Frame).
Press the magnets into the slots, make sure that they are flush with the surface, and detach the C.lamp connector.
Clean up printed Part 1 (Light Frame) from any print imperfections.
Take 4 3x3mm round magnets, place them on top of inserted magnets on the Part 2, and mark them with a marker (this is an important step).
Take those 4 marked 3x3mm round magnets and insert them into slots on Part 1 (Light Frame), make sure that the side of the magnet that was marked with marker is facing inside the Part 1 (Light Frame).
Make sure that inserted magnets are flush with the surface.
Assemble the Instant Photo Frame by putting a photo of your choice between magnetic parts.
Use similar steps for Dark Frame.
In the future, when more C.lamp attachments will be release by me, or created by the community by embedding C.lamp Attachment Ports into the other designs and models, you should follow the same instructions to assemble new attachments, to make sure that magnets polarity stays the same between different attachments. Read more about C.lamp System.
All sketches, wireframes, visuals, user experience design, industrial design, 3D models, 3D model renders, STL files are created by Not Really Lex (NotReallyLex) and copyright protected.
Unauthorized editing the of the C.lamp clamp model or images including removing logos and author information from C.lamp model and other C.lamp attachment models , selling digital copies, selling 3D printed versions or reproductions created through other technologies, redistributing digital copies for sale, or redistributing physical 3D printed versions or reproductions created through other technologies for sale is strictly prohibited. Violators may be subject to penalties under applicable U.S. and international copyright laws.
Individuals are permitted to use the Magnetic Attachment Connector component of the C.lamp system in their own original designs and derivative works to create various attachments for the C.lamp system, provided that the component is not sold as a standalone product and that proper attribution to the original 3D model and author are given (meaning Remix Culture allowed only for adding C.lamp Attachment Ports to your models).
Adding C.lamp Attachment Ports to NSFW models is prohibited.
All rights reserved. Copyright © 2024 Not Really Lex (NotReallyLex)
This product contains magnets. Consumers should exercise caution and adhere to the following safety guidelines and warnings. This disclaimer is intended to make the users aware of the potential risks and proper usage associated with the magnets contained in this product.
1. Health Risks and Medical Devices: Magnets can affect the operation of pacemakers, implantable cardioverter defibrillators (ICDs), and other medical devices. If you have a pacemaker or any other medical device, consult your physician before handling or using this product. Keep this product at a safe distance from such devices, as recommended by your healthcare provider.
2. Choking Hazard: Small magnets can be a choking hazard. Keep this product away from small children who might swallow the magnets. If magnets are swallowed, seek medical attention immediately.
3. Magnetic Surfaces and Data Loss: Magnets can cause damage to magnetic media such as credit cards, computer hard drives, and other data storage devices. Keep this product away from such items to avoid data loss or damage.
4. Attraction and Pinching Hazard: The magnetic force may cause this product to attract other metal objects or other magnets, possibly leading to pinching injuries or damage to the product and surrounding objects. Be cautious when handling.
5. Interference with Electronic Devices: Magnets can interfere with the normal operation of electronic devices, including smartphones, tablets, and computers. Do not place this product near electronic devices.
6. Disposal: The product and its magnets should be disposed of in accordance with applicable local, state, and federal laws and regulations governing the disposal of magnetic materials.
By using, or handling this product, you acknowledge and agree that you have read and understand these warnings and safety guidelines, and that you will comply with them. You also agree to hold 3D model author harmless for any injury, damage, or loss that may result from the improper handling or use of the magnets contained in this product.
This disclaimer is provided “as is” without any representations or warranties, express or implied. 3D model author makes no representations or warranties in relation to the safety and proper use of the magnets in this product.
Not Really Lex (NotReallyLex)
March 5, 2024
These 3D models of the C.lamp system and its accessories (“Model”) is provided "as is," without any warranties or guarantees of any kind, either express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement.
Not Really Lex (NotReallyLex) the author of the Model (“Author”) expressly disclaims all liability and responsibility for any damages, losses, costs, expenses, or other liabilities, whether direct, indirect, incidental, consequential, or otherwise (including, without limitation, any damage to personal property), arising out of or in connection with the use, inability to use, or performance of the Model.
The Model is made from plastic materials which are subject to degradation, wear and tear, and potential failure over time due to various factors including, but not limited to, environmental conditions, handling, and load-bearing. You acknowledge and understand that plastic is not an indefinitely durable material and may not be suitable for supporting valuable or heavy items.
By choosing to use the Model, you assume all risks associated with such use. If you elect to place any valuable items or property on or in association with the Model, you do so solely at your own risk. The Author shall not be liable or responsible for any damages to, or loss of, any such items or property, nor for any injuries, losses, or damages incurred as a result thereof.
It is recommended that users exercise caution and consider the nature of the materials used in the Model, as well as the weight and value of the items they choose to place on it. It is further recommended that users regularly inspect the Model for any signs of wear, degradation, or instability, and discontinue use if any such signs are observed.
By using this Model, you acknowledge that you have read and understood this disclaimer, and you agree to be bound by its terms and conditions. If you do not agree to these terms, do not use this Model.
THE AUTHOR MAKES NO WARRANTIES, REPRESENTATIONS, OR GUARANTEES AS TO THE MODEL’S QUALITY, CAPABILITY, OR SUITABILITY FOR A PARTICULAR PURPOSE, AND SHALL IN NO EVENT BE LIABLE FOR ANY DAMAGES WHATSOEVER ARISING OUT OF OR RELATED TO YOUR USE OF THE MODEL.
This disclaimer is provided “as is” without any representations or warranties, express or implied. 3D model author makes no representations or warranties in relation to the safety and proper use of this product.
Not Really Lex (NotReallyLex)
March 5, 2024
License:
Creative Commons — Attribution — Noncommercial — Share Alike
NotReallyLex
